[Cm93] Prime Line - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
93
MAT
1. FUNCTION:
This command is used to assign the prime line to a station line or a trunk line on a Multiline Terminal.
The prime line is the line seized when the Multiline Terminal user goes off-hook or presses the speaker
button.
2. PRECAUTION:
(1) Any one station line or trunk line provided on the Multiline Terminal can be assigned as Prime
Line.
(2) This command is included in MAT mode menu "A2" [D
3. ASSIGNMENT PROCEDURE:
ST + 93 + DE
4. DATA TABLE:
MY LINE NUMBER
X
XXXX
Note: Any station number or Virtual Line number can be assigned to the Prime Line.
A single-line telephone cannot be assigned as the Prime Line.
[CM93] Prime Line
TITLE:
PRIME LINE
PRIMARY
EXTENSION
+ + DE
NUMBER
(1 – 4 digits)
SETTING DATA
DATA
X Station Number/Virtual Line Number
Note
XXXX
D000 Trunk Number
D255
ND-45669 (E)
term
Key [COM01]).
STATION TRUNK
+ NUMBER NUMBER
(1 - 4 digits) (1 - 4 digits)
MEANING
CM93
+ EXE
RELATED
COMMAND
CM10, CM11
CM30 YY = 02, 03, 18
CHAPTER 3
Page 301
Revision 2.0