User Programmable Feature - NEC DSX Software Manual

Operation
To place a call using a line key:
1. Lift the handset.
2. Press the line key.
3. Dial the outside number.
To answer an incoming call using a line key.
Listen for ringing and look for the flashing line key.
1.
• Line keys that flash red are for you and your co-workers.
• Line keys that flash green are just for you (such as DILs and transfers).
2. Lift the handset.
Press the flashing line key.
3.
• If you have Ringing Line Preference, lifting the handset answers the call.
• If you have Automatic Handsfree, while on a call you can press another line key to put your first call on Hold.

User Programmable Feature

Feature
Line Keys
DSX Software Manual
Using your Line Keys
Setting Line Key Ringing
Mnemonic
#RA (#72) #RAL + Line key repeatedly to select ringing mode +
SPEAKER to exit.
• Line keys flash as follows:
- Lamp only = On red
- Immediate ring = On green
- Delay ring = Fast flash green
- Night ring = Slow flash green
Operation
Line Keys
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Access Level
2-5
Features ◆ 229