User Programmable Feature - NEC DSX Software Manual

Operation
To place an Intercom call:
1. Lift handset and press
Dial your co-worker's extension number (300-427).
2.
• To call the operator, dial the operator's extension number or dial
• If your call voice-announces the destination, you can dial
To answer an intercom call:
1. Do one of the following
a. If you hear two beeps (your phone has Handsfree Answerback):
• Speak toward the phone.
OR
• Lift handset for privacy.
If you hear one beep (your phone does not have Handsfree Answerback):
b.
• Lift the handset for privacy.
c. If you hear ringing, lift the handset.

User Programmable Feature

Feature
Intercom
DSX Software Manual
Placing and Answering Intercom Calls
INTERCOM .
Setting Up Incoming Voice Announcements
Mnemonic
#VA (#82) +
#VA V
0 or 01
1 to force the call to ring.
Operation
for voice ann. or for ring +
R
Intercom
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
- 04 (depending on your system setup).
Access Level
to exit.
SPEAKER
Features ◆ 213
3-5