Auto Redial - NEC DSX Software Manual

Auto Redial

Auto Redial
Description
Instead of redialing, have Auto Redial periodically retry a busy outside number.
Auto Redial periodically redials a busy outside number. If a keyset user places an outside call and the call
recipient is busy, the user can press a soft key to enable Auto Redial. The keyset user doesn't have to retry
the number, hoping it will go through.
Auto Redial will periodically retry the number up to 15 times. Auto Redial cancels when the called party
rings or answers, or when the extension:
Places or answers another outside call.
❥
Receives an Intercom voice announcement or answers an Intercom call by lifting the handset or pressing
❥
SPEAKER
Presses SPEAKER to cancel Auto Redial.
❥
Presses any other fixed feature key except MIC .
❥
Lifts and replaces the handset.
❥
Presses the CANCEL soft key (Super Display only).
❥
For your reference, the following table shows the standard call progress tones.
Conditions
• None
Default Setting
• Enabled
28 ◆ Features
.
Description
Dial tone
Reorder (Fast Busy) tone
Busy tone
Audible ring tone (ring-
back)
Stutter dial tone
Call Progress Tones
Frequencies
350 Hz + 440 Hz
480 Hz + 620 Hz
480 Hz + 620 Hz
440 Hz + 880 Hz
350 Hz + 440 Hz
Rate
Steady
250 mS on, 250 mS off
(+ 25 mS)
500 mS on, 500 mS off
(+ 50 mS)
800mS to 1.2 sec on, 2.7
sec to 3.3 sec off
800 mS to 1.2 sec on,
800mS to 1.2 sec off
DSX Software Manual