Language Settings; Administrator Settings - SMC Networks WBR14S-N3 - annexe 1 Manual

Language Settings

You can change the language displayed in web interface. Chooses the appropriate
language of your choice from the drop-down list, then click "Apply". (Options:
English/Traditional Chinese/Simplified Chinese. Default: English)

Administrator Settings

To protect access to the management interface, you need to configure a new
Administrator's user name and password as soon as possible. If a new user name
and password are not configured, then anyone having access to the wireless AP/
Router may be able to compromise the unit's security by entering the default values.
Once a new Administrator has been configured, you can delete the default "admin"
user name from the system.
• Username – The name of the user. The default names preset for access to the unit
is "admin". (Length: 3-16 characters, case sensitive)
• Password – The password for management access. The default password preset
for access to the unit is "smcadmin" (Length: 3-16 characters, case sensitive)
• Confirm Password – Prompts you to enter the password again for verification.
Time Zone Settings
The System Management page allows you to manually configure time settings or
enable the use of an Network Time Protocol (NTP) server.
• Date Time Set By – Allows you to manually configure time settings or select the
use of an NTP server.
• Time Zone – Specifies the time zone in Greenwich Mean Time (GMT).
• Primary/Secondary NTP Server – The IP address or URL of the NTP server to
be used.
Figure 5-34. Time Zone Settings
Administration Settings
5
5-45