Static Ip - SMC Networks WBR14S-N3 - annexe 1 Manual

5
System Configuration

Static IP

Configures a static IP for the WAN port.
• IP Address – The IP address of the wireless AP/Router. Valid IP addresses
consist of four decimal numbers, 0 to 255, separated by periods.
• Subnet Mask – The mask that identifies the host address bits used for routing to
specific subnets.
• Default Gateway – The IP address of the gateway router for the wireless AP/
Router, which is used if the requested destination address is not on the local
subnet.
• Primary DNS Server – The IP address of the Primary Domain Name Server on
the network. A DNS maps numerical IP addresses to domain names and can be
used to identify network hosts by familiar names instead of the IP addresses. If you
have one or more DNS servers located on the local network, type the IP addresses
in the text fields provided. Otherwise, leave the addresses as all zeros (0.0.0.0).
• Secondary DNS Server – The IP address of the Secondary Domain Name Server
on the network.
• MAC Clone Mode – Some ISPs limit Internet connections to a specified MAC
address of one PC. This setting allows you to manually change the MAC address
of the wireless AP/Router's WAN interface to match the PC's MAC address
provided to your ISP for registration. You can enter the registered MAC address
manually by typing it in the boxes provided. Otherwise, connect only the PC with
the registered MAC address to the wireless AP/Router, then click the "Fill My MAC"
(Default: Disable)
5-6
Figure 5-5. WAN Setting - Static IP