SMC Networks WBR14S-N3 - annexe 1 Manual page 21

To connect the wireless AP/Router for use as an access point, follow these steps:
1. Using Ethernet cable connect the wireless AP/Router's LAN and WAN ports to
PCs or a LAN switch.
2. Power on the wireless AP/Router by connecting the AC power adapter and
plugging it into a power source.
Caution: Use ONLY the power adapter supplied with the wireless AP/Router. Otherwise,
the product may be damaged.
When you power on the wireless AP/Router, verify that the Power LED turns on
and that the other LED indicators start functioning as described under "LED
Indicators" on page 1-3.
3. Set up wireless devices by pressing the WPS button on the wireless AP/Router
or by using the web interface. See "Initial Configuration" on page 4-1 for more
information on accessing the web interface.
3.
Set up wireless
devices
Notebook PC
1.
Connect LAN and WAN
ports to an Ethernet LAN
switch or PCs
Figure 2-2. Bridge Mode Connection
2
Bridge Mode
2.
Connect AC power
adapter to
power source
2-3