Pptp - SMC Networks WBR14S-N3 - annexe 1 Manual

• Operation Mode – Selects the operation mode as Keep Alive, On Demand or
Manual. (Default: Keep Alive)
- Keep Alive Mode: The wireless AP/Router will periodically check your Internet
connection and automatically re-establish your connection when disconnected.
(Default: 60 seconds)
- On Demand Mode: The maximum length of inactive time the unit will stay
connected to the DSL service provider before disconnecting. This feature only
works when Connect Type is set to "Auto-Connect." (Default: 5 minutes)
• MAC Clone Mode – Some ISPs limit Internet connections to a specified MAC
address of one PC. This setting allows you to manually change the MAC address
of the wireless AP/Router's WAN interface to match the PC's MAC address
provided to your ISP for registration. You can enter the registered MAC address
manually by typing it in the boxes provided. Otherwise, connect only the PC with
the registered MAC address to the wireless AP/Router, then click the "Fill My MAC"
(Default: Disable)

PPTP

Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing virtual
private networks. The service is provided in many European countries.
Figure 5-8. WAN Setting - PPTP
5
Network Settings
5-9