SMC Networks WBR14S-N3 - annexe 1 Manual page 73

• Default Policy – When MAC/IP/Port Filtering is enabled, the default policy will be
enabled. If you set the default policy to "Dropped", all incoming packets that don't
match the rules will be dropped and vise versa. (Default: Disable)
• MAC Address – Specifies the MAC address to block or allow traffic from.
• Destination IP Address – Specifies the destination IP address to block or allow
traffic from.
• Source IP Address – Specifies the source IP address to block or allow traffic from.
• Protocol – Specifies the destination port type, TCP, UDP or ICMP. (Default:
None).
• Destination Port Range – Specifies the range of destination port to block traffic
from the specified LAN IP address from reaching.
• Source Port Range – Specifies the range of source port to block traffic from the
specified LAN IP address from reaching.
• Action – Specifies if traffic should be accepted or dropped. (Default: Accept)
Comment – Enter a useful comment to help identify the filtering rules.
Current Filter Rules
The Current Filter Table displays the configured IP addresses and ports that are
permitted or denied access to and from the ADSL/Router.
• Select – Selects a table entry.
• MAC Address – Displays a MAC address to filter.
• Destination IP Address – Displays the destination IP address.
• Source IP Address – Displays the source IP address.
• Protocol – Displays the destination port type.
• Destination Port Range – Displays the destination port range.
• Source Port Range – Displays the source port range.
• Action – Displays if the specified traffic is accepted or dropped.
• Comment – Displays a useful comment to identify the routing rules.
Figure 5-28. MAC/IP/Port Filtering Rules
5
Firewall
5-39