Table of Contents
Advertisement
4
ISP S
ETTINGS
C
ONNECTING TO THE
I
C
NITIAL
ONFIGURATION
The wireless 3G Broadband Router offers a user-friendly web-based
management interface for the configuration of all the unit's features. Any
PC directly attached to the unit can access the management interface using
a web browser, such as Internet Explorer (version 6.0 or above).
If you are not sure of your connection method, please contact your
Internet Service Provider. There are several connection types to choose
from: Static IP, DHCP (cable connection), PPPoE (DSL connection), PPTP,
L2TP and 3G.
If using the PPPoE option, you will need to remove or disable any
N
:
OTE
PPPoE client software on your computers.
L
P
OGIN
AGE
It is recommended to make initial configuration changes by connecting a
PC directly to the wireless 3G Broadband Router's LAN port. The wireless
3G Broadband Router has a default IP address of 192.168.2.1 and a subnet
mask of 255.255.255.0. You must set your PC IP address to be on the
same subnet as the wireless 3G Broadband Router (that is, the PC and
wireless 3G Broadband Router addresses must both start 192.168.2.x).
To access the wireless 3G Broadband Router's management interface,
follow these steps:
Use your web browser to connect to the management interface using
1.
the default IP address of 192.168.2.1.
Log into the interface by entering the default username "admin" and
2.
password "smcadmin," then click OK.
It is strongly recommended to change the default password the first
N
:
OTE
time you access the web interface. For information on changing passwords,
See
"System Management" on page 98.
– 29 –
Advertisement
Table of Contents
