In-Band Management; Management Via Telnet - SMC Networks ES4704BD Manual

Chassis core routing switch

Hide thumbs Also See for ES4704BD:

Table of Contents

Reset chassis ... done.

Testing RAM...

134,217,728 RAM OK.

Initializing...

Attaching to file system ... done.

Loading nos.img ... done.

Starting at 0x10000...

Current time is WED APR 20 09: 37: 52 2005

ES4700 series Switch Operating System, Software Version ES4700 series 1.1.0.0,

http: //www.smc. com.

ES4700 series Switch

26 Ethernet/IEEE 802.3 interface(s)

Press ENTER to start session

The user can now enter commands to manage the switch. For a detailed description

for the commands, please refer to the following chapters.

1.1.2 In-band Management

In-band management refers to the management by login to the switch using

Telnet. In-band management enables management of the switch for some devices

attached to the switch. In the case when in-band management fails due to switch

configuration changes, out-of-band management can be used for configuring and

managing the switch.

To manage the switch with Telnet, the following conditions should be met:

1) Switch has an IP address configured

2) The host IP address (Telnet client) and the switch's VLAN interface IP address is

in the same network segment.

3) If not 2), Telnet client can connect to an IP address of the switch via other

devices, such as a router.

ES4700 seriesis a Layer 3 switch that can be configured with several IP addresses.

The following example assumes the shipment status of the switch where only VLAN1

exists in the system.

Es4710bd Es4700 series