SMC Networks ES4704BD Manual page 793

dot1x re-authenticate
[interface
<interface-name>]
4. Authentication Server (RADIUS server) related property configuration
1) Configure RADIUS authentication key.
Command
Global Mode
radius-server key <string>
no radius-server key
2) Configuring RADIUS Server
Command
Global Mode
radius-server
authentication
{<IPaddress>|<IPv6address
>} [[port {<portNum>}]
[primary]]
no radius-server
authentication
<IPaddress>
radius-server accounting
host
{<IPaddress>|<IPv6address
>} [[port {<portNum>}]
[primary]]
no radius-server
accounting
<IPaddress>
3) Configure RADIUS Service parameters.
Command
Global Mode
radius-server dead-time
<minutes>
no radius-server dead-time
Enables IEEE 802.1x re-authentication (no wait timeout
requires) for all ports or a specified port.
Explanation
Specifies the key for RADIUS server; the "no
radius-server key" command deletes the key for
RADIUS server.
Explanation
host
Specifies the IP address or IPv6 address and listening
port number for RADIUS authentication server; the "no
radius-server
<IPaddress>" command deletes the RADIUS server
host
Specifies the IP address or IPv6 address and listening
port number for RADIUS accounting server; the "no
radius-server
<IPaddress>" command deletes the RADIUS server
host
Explanation
Configures the restore time when RADIUS server is
down; the "no radius-server dead-time" command
restores the default setting.
793
authentication
authentication
host
host