SMC Networks ES4704BD Manual page 550

RIP, OSPF, ISIS, etc will be regarded as IGP (internal generated), or else as
INCOMPLETE
Example: Switch(config)# bgp rfc1771-strict
Switch(config)# no bgp rfc1771-strict
14.8.3.26 bgp router-id
Command: bgp router-id <ip-address>
no bgp router-id [<IP-ADDRESS>]
Function:Configure the router ID manually. The "no bgp router-id [<IP-ADDRESS>]"
cancels this configuration
Parameter: <ip-address>: Router ID
Default: Automatically acquire router ID
Command Mode: BGP routing mode.
Usage Guide: Manually set the router ID with this command
Example: Switch(config-router)# bgp router-id 1.1.1.1
14.8.3.27 bgp scan-time
Command:bgp scan-time <0-60>
no bgp scan-time [<0-60>]
Function: Set the time interval of the periodical next-hop validation; the "no bgp
scan-time [<0-60>]" command restores to the default value
Parameter: <0-60>: Validation time interval
Default: Default interval is 60s
Command Mode: BGP routing mode.
Usage Guide: Validate the next-hop of BGP route, this command is for configuring the
interval of this check. Set the parameter to 0 if you don't want to check
Example: Switch(config-router)# bgp scan-time 30
14.8.3.28 clear ip bgp
Command: clear ip bgp [view <NAME>] {<*>|<as-id>| external|peer-group
<NAME>|<ip-address>} [<ADDRESS-FAMILY>] [in [prefix-filter] |out|soft [in|out]]
Function: Clear up BGP links or states
Parameter: all
<as-id>: AS number;
<NAME>: Respectively BGP instance name and peer group name.
<ip-address>: IP address
<ADDRESS-FAMILY>: "ipv4 unicast"." Address family
Default: None
550