SMC Networks ES4704BD Manual page 101

FTP Configuration
Computer side configuration:
Start the FTP server software on the computer and set the username "Switch", and the
password "Admin". Save "nos.img", "boot.rom" and "startup-config" in the appropriate
FTP server directory on the computer.
The configuration procedures of the switch is listed below:
Switch (Config)#inter vlan 1
Switch (Config-If-Vlan1)#ip address 10.1.1.2 255.255.255.0
Switch (Config-If-Vlan1)#no shut
Switch (Config-If-Vlan1)#exit
Switch (Config)#exit
Switch#copy ftp: //Switch: Admin@10.1.1.1/nos.img nos.img
Switch#copy ftp: //Switch: Admin@10.1.1.1/boot.rom boot.rom
Switch#copy ftp: //Switch: Admin@10.1.1.1/startup-config startup-config
With the above commands, the switch will have the user profile configuration file in the
computer downloaded to the FLASH.
TFTP Configuration
Computer side configuration:
Start TFTP server software on the computer and place "nos.img", "boot.rom" and
"startup-config" to the appropriate TFTP server directory on the computer.
The configuration procedures of the switch is listed below:
Switch (Config)#inter vlan 1
Switch (Config-If-Vlan1)#ip address 10.1.1.2 255.255.255.0
Switch (Config-If-Vlan1)#no shut
Switch (Config-If-Vlan1)#exit
Switch (Config)#exit
Switch#copy tftp: //10.1.1.1/ nos.img nos.img
Switch#copy tftp: //10.1.1.1/ boot.rom boot.rom
Switch#copy tftp: //10.1.1.1/ startup-config startup-config
Scenario 5: ES4700 series acts as FTP client to view file list on the FTP server.
Synchronization conditions: The switch connects to a computer by an Ethernet port, the
computer is a FTP server with an IP address of 10.1.1.1; the switch acts as a FTP client,
and the IP address of the switch management VLAN1 interface is 10.1.1.2.
FTP Configuration
PC side:
101