Routing - SMC Networks 7904WBRA4 - annexe 1 Manual

3.7.4

Routing

Choose Advance > Routing. The page shown in the following figure appears. The page that is displayed contains
Static Route and RIP.
3.7.4.1 Static Route
Choose Static Route in the left pane. The page shown in the following figure appears. In this page, you can
configure the routing information. You can add or delete IP routes.
The following table describes the parameters and buttons of this page.
Field
Click Show Routes. The table shown in the following figure appears. The table shows a list of destination routes
commonly accessed by your network.
Description
41