SMC Networks 7904WBRA4 - annexe 1 Manual page 50

Field
Local IP Address
Remote IP Address
Subnet Mask
Unnumbered
Default Route
Add
Modify
Delete
Undo
ATM Settings
Click in the 1483 Routed mode. The page shown in the following figure appears. In this page, you can
configure parameters of this 1480 routed PVC.
Click ATM Setting in the WAN Interface page. The page shown in the following figure appears. In this page, you
can configure the parameters of the ATM for your ADSL router, including QoS type, PCR, CDVT, SCR and MBS.
If select Use DHCP, the router is a DHCP client, the WAN IP address is
assigned by the remote DHCP server.
It is the IP address of WAN interface which is provided by your ISP.
This is the gateway IP address which is provided by your ISP.
It is the subnet mask of the local IP address.
Select this checkbox to enable IP Unnumbered function.
After configuring the parameters of this page, click it to add a new PVC into
the current ATM VC table.
Select a PVC in the current ATM VC table, then modify the parameters of this
PVC. After finishing, click it to apply the change of this PVC.
Select a PVC in the current ATM VC table, then click it to delete this PVC.
Click it to refresh the page.
Click it, the ATM Settngs page appears. You can configure the parameters of
the ATM for the router, including Qos type, PCR, CDVT, SCR and MBS.
33
Description