Advanced Routing; Figure 89: Static Routing - SMC Networks SMCWBR14S-N5 User Manual

A R
DVANCED OUTING
UDP-FLOOD Packets Threshold (5~3600) - The default value is
◆
500. Enter a value between 5 ~ 3600. When the current UPD-FLOOD
Packets number is beyond the set value, the Router will startup the
blocking function immediately.
Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the
◆
TCP-SYN-FLOOD Attack Filtering.
TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value
◆
is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-
FLOOD Packets numbers is beyond the set value, the Router will startup
the blocking function immediately.
Ignore Ping Packet From WAN Port - Enable or Disable Ignore Ping
◆
Packet From WAN Port. The default setting is disabled. If enabled, the
ping packet from the Internet cannot access the Router.
Forbid Ping Packet From LAN Port - Enable or Disable Forbid Ping
◆
Packet From LAN Port. The default setting is disabled. If enabled, the
ping packet from LAN cannot access the Router. This function can be
used to defend against some viruses.
Click the Save button to save the settings.
Click the Blocked DoS Host List button to display the DoS host table by
blocking.
Select static routing from the menu; you can configure the static route in
the next screen (Figure
network information must travel to reach a specific host or network.

Figure 89: Static Routing

To add static routing entries:
Click Add New.
1.
– 98 –
C
HAPTER
89). A static route is a pre-determined path that
| Configuring the Router
4

Advanced Routing