System Requirements; Features - SMC Networks 7904WBRA4 - annexe 1 Manual

Interface
The button of the antenna.

1.4 System Requirements

Recommended system requirements are as follows:
A 10/100 base-T Ethernet card is installed on your PC
A hub or Switch. (attached to several PCs through one of Ethernet interfaces on the device)
Operating system: Windows 98SE, Windows 2000, Windows ME, Windows XP or Windows Vista
Internet Explorer V5.0 or higher, Netscape V4.0 or higher, or firefox 1.5 or higher

1.5 Features

The device supports the following features:
Various line modes
External PPPoE dial-up access
Internal PPPoE and PPPoA dial-up access
Leased line mode
Zero installation PPP bridge mode (ZIPB)
1483B, 1483R, and MER access
Multiple PVCs (eight at most) and these PVCs can be isolated from each other
A single PVC with multiple sessions
Multiple PVCs with multiple sessions
Binding of ports with PVCs
802.1Q and 802.1P protocol
DHCP server
NAT and NAPT
Static route
Firmware upgrade: Web, TFTP
Reset to factory default
DNS relay
Virtual server
DMZ
IP address mapping
Two-level passwords and user names and six accounts (at most)
Web interface
Telnet CLI
System status display
PPP session PAP and CHAP
IP filter
Function
note 1
, and FTP
3