SMC Networks 7904WBRA4 - annexe 1 Manual page 40

The following table describes the parameters in this page.
Field
DHCP Server
IP Pool Range
Show Client
Max Lease Time
Domain Name
Gateway Address
MAC-based Assignment
Click Show Client in the DHCP Server Setup page. The page shown in the following figure appears. In this page,
you can view the IP address assigned to each DHCP client.
The following table describes the parameters and buttons in this page.
Field
IP Address
MAC Address
Time Expired (s)
If set to DHCP Server, the router can assign IP addresses, IP default gateway and
DNS Servers to Windows95, Windows NT and other systems that support the DHCP
client.
It specifies the first and the last of contiguous IP address of the IP address pool.
Click it, the Active DHCP Client Table page appears. It shows the assigned IP
address of the clients.
The lease time determines the period that the PCs retain the assigned IP addresses
before the IP addresses change.
Enter the domain name if you know. If you leave this blank, the domain name
obtained by DHCP from the ISP is used. You must enter host name (system name) on
each individual PC. The domain name can be assigned from the router through the
DHCP server.
Enter the IP default gateway of the IP address pool.
Click it, the Static IP Assignment Table page appears. It allows you assign IP
addresses on the LAN to specify individual PCs based on their MAC address.
Description
It displays the IP address relative to the MAC address.
It displays the MAC address of the PC.
Each Ethernet device has a unique MAC address. The MAC address is assigned
at the factory and it consists of six pairs of hexadecimal character, for example,
00-A0-C5-00-02-12.
It shows the lease time. The lease time determines the period that the PCs retain
Description
23