Replacing The Media Board - Dell LATITUDE E6400 XFR Service Manual

4. Remove two M2 x 3-mm screws securing the media board to the chassis.
5. Remove the Media Board from the chassis

29.2 Replacing the Media Board

CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Set the Media Board into the chassis
2. Replace and tighten the two M2 x 3-mm screws for the Media Board.
3. Route and connect the media flex cable to the connector on the System Board.
4. Replace the palm rest (see Replacing the Palm rest).
5. Follow the procedures in After Working On Your Computer.
Page 55
™
Dell Latitude™ E6420 XFR Service Manual