Dell™ Latitude™ E6400 XFR Setup and Features Information WARNING: A WARNING indicates a potential for property damage, personal injury, or death. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
™ Dell Latitude™ E6400 XFR Setup and Features Information Microphone PC or PC-Express card slot (optional) ( Camera light (optional) IEEE 1394a connector ( Display latch and release Fingerprint reader (optional) Camera (optional) Contactless smart-card reader (see Smart Cards) ( DirectVue™...
Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your Dell™ computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire.
WARNING: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The battery is designed to work with your Dell computer. Do not use a battery from other computers with your computer.
™ Dell Latitude™ E6400 XFR Setup and Features Information 1. Release the rear panel. a. Push the latch to the right, to its unlocked position. b. Then, press the latch down. 2. Lower the rear panel. NOTE: See the battery removal instructions adhered to the edge of the battery.
™ Dell Latitude™ E6400 XFR Setup and Features Information 4. Use the tab on the edge of the battery to remove the battery from the computer. Battery Installation 1. Insert battery until you hear a click and a mechanical stop.
™ Dell Latitude™ E6400 XFR Setup and Features Information NOTE: See hard drive removal instructions adhered to the edge of the hard drive. 2. Press in the blue locking button on the right side of the compartment 3. While pressing in the blue locking button, use the tab on the edge of the hard drive to pull the hard drive from the compartment.
™ Dell Latitude™ E6400 XFR Setup and Features Information Back Press-Fit Doors A press-fit door is opened by inserting a finger into the door slot and pulling the door away from the computer. To close the door, rotate the door back towards the computer and press until it is in its fully closed position.
™ Dell Latitude™ E6400 XFR Setup and Features Information Front Secure Digital Door The secure digital door is located at the front of the computer behind the handle. Secure digital door To open the secure digital door, extend the small handle that is built in to the door front.
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. WARNING: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage.
™ Dell Latitude™ E6400 XFR Setup and Features Information 3. Connect USB devices, such as a mouse or keyboard. 4. Connect IEEE 1394 devices, such as a DVD player. 5. Open the computer display and press the power button to turn on the computer.
™ Dell Latitude™ E6400 XFR Setup and Features Information Enclosed smart-card reader The Smart Card can be fully inserted, allowing the protective hinged door to be closed. Insert the card into the smart card slot with the gold contact pad facing upward and pointing toward the smart card slot.
™ Dell Latitude™ E6400 XFR Setup and Features Information You can launch the pre-loaded documentation by selecting Start -> Programs -> Touchkit -> Document. Touchkit Configuration Utility Your DirectVue Touch Display system incorporates EETI technology. Touchkit is a software utility tool that allows you to configure various touch features.
™ Dell Latitude™ E6400 XFR Setup and Features Information linearization is completed, the linearity of the touch screen will be shown in the Linearization Curve window. • Draw Test: Used for accuracy and performance checking. 1. 4 Points Calibration The touch screen must be calibrated before it can work accurately. This function pops up a new window to guide you through the 4 points calibration.
™ Dell Latitude™ E6400 XFR Setup and Features Information clicks within the specified area in the specified double click time will be recognized as a double click event. 5. Mouse Emulation mode There are 5 mouse emulation modes for the Touchkit touch screen controllers. Press on the button to change the emulation mode.
™ Dell Latitude™ E6400 XFR Setup and Features Information Tether anchor points Stylus Tether NOTE: The stylus and tether are provided when the computer is configured with the optional touchscreen. NOTE: The tether can be anchored on either front corner of the computer.
™ Dell Latitude™ E6400 XFR Setup and Features Information 1. Remove the 4 screws from the front of the computer. 2. Install the shoulder strap anchors to the front of the computer using the screws removed in step 1. 3. Install the shoulder strap to the holes in the shoulder strap anchors.
Start -> Help and Support and select the option to view information about your computer. Video NOTE: Your Dell™ computer has both integrated and discrete video options. Video type Integrated and discrete on system board, hardware accelerated...
™ Dell Latitude™ E6400 XFR Setup and Features Information Output voltage 19.5 V DC Output current 4.62 A Height 32 mm (1.3 inches) Width 60 mm (2.4 inches) Depth 140 mm (5.5 inches) Weight 0.425 kg (0.9 lb) PA-3E 90 E-Series AC adapter: Output voltage 19.5 V DC...
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, Latitude, Wi-Fi Catcher, and the DELL logo are trademarks of Dell Inc.; Augmentix and QuadCool are registered trademarks, and PR-481, PrimoSeal and DirectVue are trademarks of Augmentix Corporation;...