Replacing the Media Card Reader Board
1. Follow the instructions in
Before You
2. Align the Media Card Reader board with the latch on the computer base and place the Media Card Reader board in position.
3. Route the Media Card Reader board cable into its routing guide.
4. Connect the Media Card Reader board cable to the connector on the system board.
5. Replace the palm rest (see
6. Replace the keyboard (see
7. Replace the optical drive (see
8. Replace memory module(s) (see
9. Replace the base cover (see
10. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the Optical
Drive).
Replacing the Memory
Module(s)).
Replacing the Base
Cover).
Battery).