Fan Assembly; Removing The Fan Assembly - Dell LATITUDE E6400 XFR Service Manual

7

Fan Assembly

7.1 Removing the Fan Assembly

CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Follow the instructions in Before Working on Your Computer.
2. Remove the bottom access panel (see Removing the Bottom Access Panel).
3. Remove the three M2.5 x 5-mm screws that secure the fan to the base assembly.
Page 18
™
Dell Latitude™ E6420 XFR Service Manual
1 Fan 2 M2.5 x 5-mm screws (3)
3 Connection
THIS AREA INTENTIONALLY LEFT BLANK