Replacing The Vga Panel Cover; Removing The Hdd Door; Replacing The Hdd Door - Dell LATITUDE E6400 XFR Service Manual

3. Remove the two VGA Connector jack screws and the two Serial Connector jack screws.
4. Place a scribe in the small opening and pull to remove.
39.12

Replacing the VGA Panel Cover

1. Place the VGA Panel Cover in place over the VGA port.
2. Replace the two VGA connector jack screws and the two Serial connector jack screws..
3. Follow the procedures in After Working on Your Computer.
39.13

Removing the HDD Door

1. Follow the procedures in Before Working on Your Computer.
2. Open the door to relieve hinge pressure.
3. Remove the two M3 x 3-mm screws securing the door hinges to the base assembly
39.14

Replacing the HDD Door

1. Insert door hinge onto assembly and align the hinge divots.
2. Replace the two M3 x 3-mm screws.
3. Follow the procedures in After Working on Your Computer.
Page 73
™
Dell Latitude™ E6420 XFR Service Manual