The "Info" Menu; The Trip Computer - VDO MS 5600 Manual

Hide thumbs Also See for MS 5600:
Table of Contents

Advertisement

26

The "Info" menu

The "Info" menu can be selected from the Start menu and from all guidance screens.
From a guidance screen:
Press the OK button from one of the navigation screens.
Select "Info", and press the OK button.
From the Start menu, select "Info" and press the OK key.
The following options are available:
Message selection: Selection of TMC messages, to be displayed on the screen and
output acoustically.
Traffic on route: List of the road obstructions on the planned route.
Local traffic info: List of road obstructions in a circumference of 400 km from the
current vehicle position if they are provided by the TMC supplier.
Traffic at dest.: List of road obstructions in a circumference of 400 km from the next
via point/destination if they are provided by the TMC supplier.
Route criteria: Selection of the criterion for route planning and route options, as well
as activation of the dynamic route planning. Refer also to "Settings", Page 37.
Route list: List of the segments on the planned route.
Next TMC station: Start scan for the next TMC station.
Points of interest: Selection of up to five categories of points of interest which are to
be displayed in the map display.
Via points: Display of the via-point list and deletion of via points.

The trip computer

Select "Trip computer" in the Start menu.
The integrated trip computer displays the following information:
Current speed: Current speed
Avg. speed: Average speed (since reset)
Elapsed distance: Route distance (since reset)
Elapsed time: Travel time (since reset)
Longitude*: Geographical position
Latitude*: Geographical position
A
The speed display serves only as additional information. Only the vehicle's speedometer
should be used to determine actual speed.
Resetting trip computer
Select "Reset" to reset the values for the average speed, the elapsed distance and
the elapsed time to "0".
Trip computer in the split-screen display
The trip computer can also be displayed together with the map display.
Refer also to "Screen displays", Page 18.
* Longitude and latitude are not displayed in the split-screen display.
Navigation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents