Table of Contents
Advertisement
SYSTEM SETTINGS
Traffic info
Select the "Traffic info" option from the "System settings" menu.
:
The "Traffic info" menu is shown
The following options are available:
TMC events
Select the kind of traffic obstruction to be taken into consideration for guidance
(i.e. stationary traffic, road closures, no parking possibilities, bad visibility, etc.).
Dangerous event messages cannot be switched off.
Dynamic guidance On/Off
Select whether you want the TMC information to be included in the guidance or
not.
If this function is switched off no traffic obstructions are shown or recognised for
guidance.
Language
Select the "Language" option from the "System settings" menu.
Select one of the languages loaded in the system,
or:
Select "Other language" to replace one of the loaded languages with a different
one from the supplied system software CD.
Select the language to be replaced.
:
You are prompted to insert the software CD.
Insert the VDO Dayton system software CD in the navigation computer.
Follow the instructions given by the system to load other languages.
Guidance screen
Select the "Guidance screen" option from the "System settings" menu.
Select between the following information to be shown in the status field of the
guidance screen:
–
Remaining dist. (on/off)
and one of the following time indications:
–
Arrival time
–
Remaining travel time
–
Actual time
–
No time display
38
(only with TMC extension connected)
Advertisement
Table of Contents
