Settings; Adapting Navigation System - VDO MS 5600 Manual

Adapting navigation system

You can change several settings to adapt the navigation system to meet your personal
requirements.
Select "Settings" in the Start menu.
:
The "System Settings" menu appears.
The following settings can be made:
Day / night colours
Setting the dependency of the colour scheme on the vehicle lighting. The colour scheme
can be set under "Screen config.".
Automatic switching: The colour scheme is dependent on the setting of the headlights.
Always day colour: The day colour scheme is always used.
Always night colour: The night colour scheme is always used.
Screen configuration
Setting the following screen properties:
Day colour: Selection of the colour scheme for a bright environment.
Night colour: Selection of the colour scheme for a dark environment.
Statusline left: Selection of the specification that is to be displayed in the lower left
status line.
Statusline right: Selection of the specification that is to be displayed in the lower right
status line.
Statusline top: Selection of the specification that is to be displayed in the top status
line.
Message selection
Selection of the type of TMC traffic messages that should be displayed by the navigation
system and taken into account for the dynamic route planning.
Select "Select all" or "Deselect all" if you would like to activate/deactivate all of the
message types at once.
Store the modified settings with "Store".
Press the ESC button or the 4 button to quit the menu without making a change.
Urgent traffic messages (e.g. vehicle on wrong carriageway) can not be deselected
and are always displayed.

Settings

37