Continuous Play - Aiwa XR-MT1000 Operating Instructions Manual

A EJECT
Deck 1 Deck 2 A EJECT
REVIMODE
On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
Use Type I (normal), Type II (high/CrOz) or Type IV (metal)
tapes for playback.
Press A EJECT to open the cassette holder.
Name
page
l!
I
A EJECT (for deck 1)
Deck 1
Deck 2
A EJECT (for deck 2)
DOLBY NR
29-33
REV MODE (DECK 2)
28-30
SYNC DUB NORM/HIGH 31
REC/REC MUTE
30-33
II PAUSE
29,30
1<<, WIMS 29
4FPLAY/DIR
29
STOP
29-33
The display information of the cassette decks is shown on
the display of the stereo receiver.
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode (deck 2 only)
Each time REV MODE is pressed, the reverse mode changes.
L=+-
~>+cnJ
To play one side only, select Z.
To play from front side to reverse side once only, select 1).
To play both sides repeatedly, select C=).
When tapes are loaded in both decks, 1) on the display
indicates "Continuous Play".
28
ENGLISH