Front Wheel - APRILIA RALLY 50 - 2000 Manual

48
Fig. 30
Fig. 31
DISASSEMBLY
Carefully read p. 41 (MAINTENANCE).
a
While disassembling the wheel, be care-
ful not to damage the brake pipe, the disc
and the pads.
To disassemble the front wheel, proceed as follows:
Position the vehicle on the centre stand.
a
Place a support under the vehicle, so that
the front wheel has enough space to
move and the vehicle cannot fall down.
Loosen the screw of the wheel pin clamp (1-Fig.
30).
Lock the wheel pin (2-Fig. 30) by means of an
hexagon spanner.
Remove the nut (1-Fig. 31), taking the washer.
Push the wheel pin (2-Fig. 30), by carefully acting
on the threaded end and using a rubber hammer if
c
necessary.
Check the arrangement of the odometer
control and spacer ring, in order to be
able to reassemble them correctly.
Support the front wheel and extract the wheel pin
manually.
Remove the wheel, carefully withdrawing the disc
from the brake calliper.