APRILIA RALLY 50 - 2000 Manual page 50

50
Fig. 32
Fig. 33
DISASSEMBLY
Carefully read p. 41 (MAINTENANCE).
Position the vehicle on the centre stand.
a
Before carrying out the following opera-
tions, let the engine and the silencer cool
down until they reach room temperature,
in order to avoid burns.
Unscrew and remove the two screws (1-2-Fig. 32)
that fasten the silencer to the engine, taking the
two bushings of the upper screw (2-Fig. 32).
Screws (1-2-Fig. 32) driving torque:
25 Nm (2,5 kgm).
Unscrew and remove the screws (3-4-Fig. 32).
Screws (3-4-Fig. 32) driving torque:
12 Nm (1,2 kgm).
c
Remove the silencer.
Upon reassembly, change the exhaust
manifold-silencer seal.