28
Fig. 15
Fig. 16
Remove the handlebar cover, see p. 57 (REMO-
VING THE FRONT HANDLEBAR COVER).
Unscrew the two screws (1-Fig. 16).
Remove the cover (2-Fig. 16).
a
In order not to spill the brake fluid while
topping up, keep the fluid in the reservoir
parallel to the reservoir rim.
Remove the gasket.
Fill the tank with brake fluid, see p. 77 (LUBRI-
CANT CHART), until it covers the glass (1-Fig. 15)
completely.
Put back the gasket in its seat.
Put back the cover (2-Fig. 16).
Screw and tighten the two screws (1-Fig. 16).
Put back the handlebar cover.
a
Check the braking efficiency. If neces-
sary, contact your
In case of excessive movement of the
brake lever, of excessive elasticity or in case
there is air in the circuit, contact your
ficial Dealer, since it may be necessary to bleed
the system.
In any case, the bleeding must be carried out af-
c
ter the first 500 km.
Remember: 1 mile = 1.6 km
Official Dealer.
1 km = 0.625 miles
Of-