APRILIA RALLY 50 - 2000 Manual page 59

Carefully read p. 41 (MAINTENANCE).
The ideal slack of the accelerator control should be
about 2-3 mm.
To adjust the slack, proceed as follows:
Position the vehicle on the centre stand.
Remove the protection element (1).
Loosen the nut (2) (by turning it clockwise).
Act on the adjuster (3), positioned at the beginning
of the accelerator control cable.
After the adjustment:
Tighten the nut (2) (by turning it anticlockwise),
thus locking the adjuster (3) and put back the pro-
tection element (1).
Fig. 43
59