Instructions For Use; Preliminary Checking Operations - APRILIA LEONARDO 125 - 2006 Manual

Leonardo125-300_UK.book Page 32 Tuesday, January 20, 2004 3:54 PM

INSTRUCTIONS FOR USE

! WARNING
Before departure, always carry out a
preliminary checking of the vehicle, to
make sure that it functions correctly
and safely, see the following table
( P R E L I M I N A R Y C H E C K I N G
OPERATIONS).
The non-performance of these checking
operations can cause severe personal
injuries or damage to the vehicle.
Do not hesitate to consult your aprilia
O f f i c i a l D e a l e r i n c a s e t h e r e i s
something you do not understand
about the functioning of some controls
or in case you suspect or discover
some irregularities.
It does not take long to carry out a
check-up and this operation ensures
you much more safety.
32 use and maintenance Leonardo 125 - 150 - 250 - 300

PRELIMINARY CHECKING OPERATIONS

Component
Front and rear Check the functioning, the idle stroke of the control le-
disc brakes vers, the fluid level and make sure there are no leaks.
Check the wear of the pads. If necessary, top up the
brake reservoir.
Brake levers Make sure that they work smoothly.
If necessary, lubricate the articulations.
Accelerator Make sure that it works smoothly and that it is possible
to open and close it completely, in all steering posi-
tions. If necessary, adjust and/or lubricate it.
Wheel/tyres Check the tyre surface, the inflation pressure, wear
and tear and any damage.
Steering Make sure that the steering rotates smoothly, without
any clearance or slackening.
Side stand and Make sure that they work smoothly and that the spring
centre stand tension brings them back to their normal position.
If necessary, lubricate joints and hinges.
Fastening elements Make sure that the fastening elements are not loose.
If necessary, adjust or tighten them.
Fuel tank Check the fuel level and top up, if necessary.
Make sure there are no leaks or occlusions in the cir-
cuit. Make sure the filler cap is correctly tightened.
Coolant The coolant level in the expansion tank must be inclu-
ded between the "MIN" and "MAX" marks.
Engine stop switch Make sure that it functions correctly.
& '
( - )
Lights, warning Check the proper functioning of the acoustic and visual
lights, horn and devices.
electrical devices Change the bulbs or carry out the necessary repairs in
case of failure.
Page
Check
26, 48
55
30
51
49
24, 65
28, 29
19
57 √ 64
√
√