Vantage CNM 2.0 User's Guide
Table 132 System Maintenance Logs (continued)
LOG MESSAGE
SMT Session Begin
SMT Session End
Configuration Change: PC =
0x%x, Task ID = 0x%x
Successful SSH login
SSH login failed
Successful HTTPS login
HTTPS login failed
Table 133 System Error Logs
LOG MESSAGE
%s exceeds the max.
number of session per
host!
setNetBIOSFilter: calloc
error
readNetBIOSFilter: calloc
error
WAN connection is down.
Table 134 Access Control Logs
LOG MESSAGE
Firewall default policy: [ TCP |
UDP | IGMP | ESP | GRE | OSPF]
<Packet Direction>
Firewall rule [NOT] match:[TCP |
UDP | IGMP | ESP | GRE | OSPF]
<Packet Direction>, <ruled>
Triangle route packet forwarded:
[TCP | UDP | IGMP | ESP | GRE |
OSPF]
301
DESCRIPTION
An SMT management session has started.
An SMT management session has ended.
The router is saving configuration changes.
Someone has logged on to the router's SSH server.
Someone has failed to log on to the router's SSH server.
Someone has logged on to the router's web configurator
interface using HTTPS protocol.
Someone has failed to log on to the router's web configurator
interface using HTTPS protocol.
DESCRIPTION
This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
The router failed to allocate memory for the NetBIOS filter settings.
The router failed to allocate memory for the NetBIOS filter settings.
A WAN connection is down. You cannot access the network
through this interface.
DESCRIPTION
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched the default policy and was blocked or forwarded
according to the default policy's setting.
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched (or did not match) a configured firewall rule
(denoted by its number) and was blocked or forwarded
according to the rule.
The firewall allowed a triangle route session to pass
through.