Table of Contents
Advertisement
Vantage CNM 2.0 User's Guide
Figure 62 Configuration > WAN > Backup – Prestige
The following table describes the fields in this screen.
Table 38
WAN Backup – Prestige
LABEL
Backup Type
Check WAN IP
Address1-3
123
DESCRIPTION
Select the method that the Prestige uses to check the DSL connection.
Select DSL Link to have the Prestige check if the connection to the DSLAM
is up. Select ICMP to have the Prestige periodically ping the IP addresses
configured in the Check WAN IP Address type fields.
Configure this field to test your Prestige's WAN accessibility. Type the IP
address of a reliable nearby computer (for example, your ISP's DNS server
address).
If you activate either traffic redirect or dial backup, you must configure at
least one IP address here.
When using a WAN backup connection, the Prestige periodically pings the
addresses configured here and uses the other WAN backup connection (if
configured) if there is no response.
Chapter 8 Configuration > WAN
Advertisement
Table of Contents
