Table of Contents
Advertisement
Table 14 Configuration > General > DDNS (continued)
LABEL
IP Address
E-Mail (Prestige Only)
Apply
Reset
4.2.3 Time Setting
Use this screen to configure your time settings.
Figure 35 Configuration > General > Time Setting
The following table describes the fields in this screen
Table 15 Configuration > General > Time Setting
LABEL
Time Protocol
(or Use Time Server
when Bootup)
Time Server
Address.
Time Zone
Chapter 4 Configuration > Select Device BB & General
DESCRIPTION
Enter the IP address if you select the User Specify option.
Type the e-mail address here or select from a previously created e-mail
component BB. You may also save a newly entered e-mail address as a new
e-mail component BB.
Click Apply to save your changes back to the device.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Select the time service protocol that your timeserver sends when you turn on the
device. Not all time servers support all protocols, so you may have to check with
your ISP/network administrator or use trial and error to find a protocol that works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC 868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
The default, NTP (RFC 1305), is similar to Time (RFC 868).
Select None to enter the time and date manually.
Enter the IP address of your timeserver. Check with your ISP/network
administrator if you are unsure of this information (the default is
tick.stdtime.gov.tw)
Choose the Time Zone of your location. This will set the time difference between
your time zone and Greenwich Mean Time (GMT).
Vantage CNM 2.0 User's Guide
66
Advertisement
Table of Contents
