Table 3 Pop-Up Menus Icons; Table 4 Content Pane Icons - ZyXEL Communications VANTAGE CNM 2.0 User Manual

Vantage CNM 2.0 User's Guide
Table 2 Object Tree Icons (continued)
ICON DESCRIPTION
This is a ZyWALL device that has firmware uploading.
This is a ZyWALL device that has an alarm that is turned on.
This is a ZyWALL device turned off with an alarm and will have a firmware upload.
This is a ZyWALL device turned on.
This is a ZyWALL device with an alarm.
This is a ZyWALL device turned on with an alarm and has firmware uploading.
This is a ZyWALL device and has firmware uploading.
This is a Prestige device turned off.
This is a Prestige device turned off with an alarm.
This is a Prestige device turned off with an alarm and will have a firmware upload.
This is a Prestige device turned off and will have a firmware upload.
This is a Prestige device that has an alarm that is turned on.
This is a Prestige device with an alarm.
This is a Prestige device with an alarm and has firmware uploading.
This is a Prestige device with firmware uploading.
Click this icon to refresh the current topology tree.
Click this icon to view the topology detail information for the current user.

Table 3 Pop-up Menus Icons

ICON DESCRIPTION
Click this icon to Add a new topology view.
Click this icon to Edit the selected topology view.
Click this icon to Delete the selected topology view.
Click this icon to Close the popup dialog.

Table 4 Content Pane Icons

ICON DESCRIPTION
Click Apply the current configuration settings and apply to the server.
Click Save the current configuration settings but not apply to the server. The configuration can be
cancelled.
Click Back to go to the previous page.
Click Next to navigate to the next page.
Click to Reset the current page.s
Click OK to apply the configuration.
Click Yes to confirm your configuration edit.
Click No to cancel the configuration edit.
Click Finish to complete the whole configuration.
41 Chapter 2 GUI Introduction