• the ZyXEL Device is in bridge mode
• you set the ZyXEL Device to use a static (fixed) WAN IP address.
4.5 Internet Connection
To change your ZyXEL Device's WAN Internet access settings, click Network > WAN. The
screen differs by the encapsulation.
See
Section 4.1 on page 48
Figure 26 Internet Connection (PPPoE)
The following table describes the labels in this screen.
Table 12 Internet Connection
LABEL
General
Name
Mode
Chapter 4 WAN Setup
for more information.
DESCRIPTION
Enter the name of your Internet Service Provider, e.g., MyISP. This information is
for identification purposes only.
Select Routing (default) from the drop-down list box if your ISP allows multiple
computers to share an Internet account. Otherwise select Bridge.
P-660R-D Series User's Guide
54