Configuring Icmp; Figure 61 Remote Management: Icmp; Table 40 Remote Management: Icmp - ZyXEL Communications P-660R-D Series User Manual

Table 39 Remote Management: DNS
LABEL
Apply
Cancel

9.8 Configuring ICMP

To change your ZyXEL Device's security settings, click Advanced > Remote MGMT >
ICMP. The screen appears as shown.
If an outside user attempts to probe an unsupported port on your ZyXEL Device, an ICMP
response packet is automatically returned. This allows the outside user to know the ZyXEL
Device exists. Your ZyXEL Device supports anti-probing, which prevents the ICMP response
packet from being sent. This keeps outsiders from discovering your ZyXEL Device when
unsupported ports are probed.

Figure 61 Remote Management: ICMP

The following table describes the labels in this screen.

Table 40 Remote Management: ICMP

LABEL
ICMP
Respond to Ping
on
Apply
Cancel
Chapter 9 Remote Management Configuration
DESCRIPTION
Click Apply to save your customized settings and exit this screen.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Internet Control Message Protocol is a message control and error-reporting
protocol between a host server and a gateway to the Internet. ICMP uses Internet
Protocol (IP) datagrams, but the messages are processed by the TCP/IP software
and directly apparent to the application user.
The ZyXEL Device will not respond to any incoming Ping requests when Disable is
selected. Select LAN to reply to incoming LAN Ping requests. Select WAN to reply
to incoming WAN Ping requests. Otherwise select LAN & WAN to reply to both
incoming LAN and WAN Ping requests.
Click Apply to save your customized settings and exit this screen.
Click Cancel to begin configuring this screen afresh.
P-660R-D Series User's Guide
108