P-660R-D Series User's Guide
Table 38 Remote Management: SNMP
LABEL
Community
Destination
Apply
Cancel
9.7 Configuring DNS
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to the chapter on LAN for background information.
To change your ZyXEL Device's DNS settings, click Advanced > Remote MGMT > DNS.
The screen appears as shown. Use this screen to set from which IP address the ZyXEL Device
will accept DNS queries and on which interface it can send them your ZyXEL Device's DNS
settings.
Figure 60 Remote Management: DNS
The following table describes the labels in this screen.
Table 39 Remote Management: DNS
LABEL
Port
Access Status
Secured Client IP A secured client is a "trusted" computer that is allowed to send DNS queries to the
107
DESCRIPTION
Type the trap community, which is the password sent with each trap to the
SNMP manager. The default is public and allows all requests.
Type the IP address of the station to send your SNMP traps to.
Click Apply to save your customized settings and exit this screen.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
The DNS service port number is 53.
Select the interface(s) through which a computer may send DNS queries to the
ZyXEL Device.
ZyXEL Device.
Select All to allow any computer to send DNS queries to the ZyXEL Device.
Choose Selected to just allow the computer with the IP address that you specify to
send DNS queries to the ZyXEL Device.
Chapter 9 Remote Management Configuration