Configuring A Filter Set; Figure 190 Menu 21: Filter And Firewall Setup; Figure 191 Menu 21.1: Filter Set Configuration; Table 119 Abbreviations Used In The Filter Rules Summary Menu - ZyXEL Communications P-335WT User Manual

31.2 Configuring a Filter Set

The Prestige includes filtering for NetBIOS over TCP/IP packets by default. To configure
another filter set, follow the procedure below.
1 Enter 21 in the main menu to open menu 21.

Figure 190 Menu 21: Filter and Firewall Setup

2 Enter 1 to bring up the following menu.

Figure 191 Menu 21.1: Filter Set Configuration

Filter
Set #
------
1
2
3
4
5
6
Select the filter set you wish to configure (1-12) and press [ENTER]
Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.1 - Filter
Rules Summary.
This screen shows the summary of the existing rules in the filter set. The following tables
contain a brief description of the abbreviations used in the previous menus.

Table 119 Abbreviations Used in the Filter Rules Summary Menu

FIELD
#
A
Type
Chapter 31 Filter Configuration
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup
Enter Menu Selection Number:
Menu 21.1 - Filter Set Configuration
Comments
-----------------
_______________
_______________
_______________
_______________
_______________
_______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
The filter rule number: 1 to 6.
Active: "Y" means the rule is active. "N" means the rule is inactive.
The type of filter rule: "GEN" for Generic, "IP" for TCP/IP.
P-335 Series User's Guide
Filter
Set # Comments
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
.
337