Antenna Characteristics; Radiation Pattern; Antenna Gain; Types Of Antennas For Wlan - ZyXEL Communications P-335WT User Manual

Antenna Selection and Positioning
An antenna couples RF signals onto air. A transmitter within a wireless device sends an RF
signal to the antenna, which propagates the signal through the air. The antenna also operates in
reverse by capturing RF signals from the air.
Choosing the right antennas and positioning them properly increases the range and coverage
area of a wireless LAN.

Antenna Characteristics

Frequency
An antenna in the frequency of 2.4GHz (IEEE 802.11b) or 5GHz(IEEE 802.11a) is needed to
communicate efficiently in a wireless LAN.

Radiation Pattern

A radiation pattern is a diagram that allows you to visualize the shape of the antenna's
coverage area.

Antenna Gain

Antenna gain, measured in dB (decibel), is the increase in coverage within the RF beam width.
Higher antenna gain improves the range of the signal for better communications.
For an indoor site, each 1 dB increase in antenna gain results in a range increase of
approximately 2.5%. For an unobstructed outdoor site, each 1dB increase in gain results in a
range increase of approximately 5%. Actual results may vary depending on the network
environment.
Antenna gain is sometimes specified in dBi, which is how much the antenna increases the
signal power compared to using an isotropic antenna. An isotropic antenna is a theoretical
perfect antenna that sends out radio signals equally well in all directions. dBi represents the
true gain that the antenna provides.

Types of Antennas For WLAN

There are two types of antennas used for wireless LAN applications.
Appendix J Antenna Selection and Positioning Recommendation
P-335 Series User's Guide
Appendix J
Recommendation
491