Ftp Screen; Dns Screen; Figure 128 Management > Remote Mgmt > Ftp; Table 81 Management > Remote Mgmt > Ftp - ZyXEL Communications NBG-460N User Manual

Chapter 18 Remote Management

18.5 FTP Screen

You can use FTP (File Transfer Protocol) to upload and download the NBG460N's firmware
and configuration files. To use this feature, your computer must have an FTP client.
To change your NBG460N's FTP settings, click Management > Remote MGMT > FTP. The
screen appears as shown. Use this screen to specify which interfaces allow FTP access and
from which IP address the access can come.
Figure 128 Management > Remote MGMT > FTP
The following table describes the labels in this screen.
Table 81 Management > Remote MGMT > FTP
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

18.6 DNS Screen

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to the chapter on Wizard Setup for background information.
To change your NBG460N's DNS settings, click Management > Remote MGMT > DNS.
The screen appears as shown.
212
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the NBG460N using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the
NBG460N using this service.
Select All to allow any computer to access the NBG460N using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the NBG460N using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
NBG460N User's Guide