Back To Factory Defaults; Restart Screen; Figure 154 Configuration Restore Successful; Figure 155 Temporarily Disconnected - ZyXEL Communications NBG-460N User Manual

Chapter 22 Tools

Figure 154 Configuration Restore Successful

The NBG460N automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.

Figure 155 Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default NBG460N IP address (192.168.1.1).
See Appendix D on page 293
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.

Figure 156 Configuration Restore Error

22.2.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the NBG460N to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
NBG460N. Refer to the chapter about introducing the web configurator for more information
on the RESET button.

22.3 Restart Screen

System restart allows you to reboot the NBG460N without turning the power off.
254
for details on how to set up your computer's IP address.
NBG460N User's Guide