Accessing The Ipod Touch Web Configurator; Figure 77 Login Screen - ZyXEL Communications NBG-460N User Manual

If you have not configured your wireless settings yet you can do so by using
the Wizard in the web configurator you access from your computer. Click the
Wizard icon
into the web configurator from your computer. See
more information on using the Wizard.
1 On the iPod Touch's main screen press Settings and then press Wi-fi.
2 On the list of networks press the NBG460N's network name (SSID) to connect to it. If
you are prompted for any security settings enter them and press connect.
The pre-shared key is case-sensitive. If you have problems connecting then
try checking the security settings in the web configurator from your computer
and try again.

7.11.1 Accessing the iPod Touch Web Configurator

Now that you are connected to the NBG460N's wireless network you can access the iPod
Touch web configurator. To do this follow the steps below:
1 Launch the iPod Touch's web browser from the main screen. The default web browser is
Safari.
2 Enter the IP address of the NBG460N into the address bar and go to that address. The
default IP address for the NBG460N is 192.168.1.1.
3 The login screen should display.

Figure 77 Login Screen

NBG460N User's Guide
or the Go To Wizard Setup web link you see after logging
Chapter 7 Wireless LAN
Chapter 4 on page 49 for
115