Time Setting Screen; Figure 146 Maintenance > System > Time Setting - ZyXEL Communications NBG-460N User Manual

Chapter 20 System
Table 84 Maintenance > System > General
LABEL
Administrator
Inactivity Timer
Password Setup
Old Password
New Password
Retype to Confirm
Apply
Reset

20.3 Time Setting Screen

To change your NBG460N's time and date, click Maintenance > System > Time Setting.
The screen appears as shown. Use this screen to configure the NBG460N's time based on your
local time zone.
Figure 146 Maintenance > System > Time Setting
230
DESCRIPTION
Type how many minutes a management session can be left idle before the
session times out. The default is 5 minutes. After it times out you have to log in
with your password again. Very long idle timeouts may have security risks. A
value of "0" means a management session never times out, no matter how long it
has been left idle (not recommended).
Change your NBG460N's password (recommended) using the fields as shown.
Type the default password or the existing password you use to access the
system in this field.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Type the new password again in this field.
Click Apply to save your changes back to the NBG460N.
Click Reset to begin configuring this screen afresh.
NBG460N User's Guide