Figure 65 Network > Wireless Lan > General: Wpa/Wpa2; Table 33 Network > Wireless Lan > General: Wpa/Wpa2 - ZyXEL Communications NBG-460N User Manual

Chapter 7 Wireless LAN
Figure 65 Network > Wireless LAN > General: WPA/WPA2
The following table describes the labels in this screen.
Table 33 Network > Wireless LAN > General: WPA/WPA2
LABEL
WPA Compatible
ReAuthentication
Timer (in seconds)
Idle Timeout
100
DESCRIPTION
This check box is available only when you select WPA2-PSK or WPA2 in the
Security Mode field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the NBG460N even when the NBG460N is using WPA2-PSK
or WPA2.
Specify how often wireless stations have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
The default time interval is 1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server
has priority.
The NBG460N automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the
username and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
NBG460N User's Guide