Table of Contents
Advertisement
For example, you may set up three wireless networks (A, B and C) in your office. A is for workers,
B is for guests and C is specific to a VoIP device in the meeting room.
8.4.1 Configuring Security Settings of Guest SSIDs
The NBG6815 is in router mode by default.
This example shows you how to configure the SSIDs with the following parameters on your
NBG6815 (in router mode).
SSID
SSID_Worker
SSID_VoIP
SSID_Guest
Connect your computer to the LAN port of the NBG6815 using an Ethernet cable.
1
The default IP address of the NBG6815 in router mode is "192.168.1.1". In this case, your
2
computer must have an IP address in the range between "192.168.1.2" and "192.168.1.254".
Click Start > Run on your computer in Windows. Type "cmd" in the dialog box. Enter "ipconfig" to
3
show your computer's IP address. If your computer's IP address is not in the correct range then see
Appendix C on page 172
After you've set your computer's IP address, open a web browser such as Internet Explorer and
4
type "http://192.168.1.1" as the web address in your web browser.
Enter "1234" (default) as the password and click Login.
5
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
6
Chapter 8 Tutorials
A
SSID_Worker
B
SSID_Guest
SECURITY TYPE
KEY
WPA2-PSK
DoNotStealMyWirelessNetwork
WPA Compatible
WPA-PSK
VoIPOnly12345678
WPA-PSK
keyexample123
for information on changing your computer's IP address.
NBG6815 User's Guide
C
SSID_VoIP
55
Advertisement
Table of Contents
