Configuring Snmp; Table 100 Snmp Switch Traps - ZyXEL Communications MES-3728 User Manual

Chapter 30 Access Control

Table 100 SNMP Switch Traps

OPTION OBJECT LABEL
stp STPNewRoot
MRSTPNewRoot
MSTPNewRoot
STPTopologyChange
MRSTPTopologyChange
MSTPTopologyChange
mactable MacTableFullEventOn
MacTableFullEventClear
rmon RmonRisingAlarm
RmonFallingAlarm

30.3.4 Configuring SNMP

Click Management > Access Control > SNMP to view the screen as shown. Use this screen
to configure your SNMP settings.
262
OBJECT ID
1.3.6.1.2.1.17.0.1
1.3.6.1.4.1.890.1.5.8.45.36.2.1
1.3.6.1.4.1.890.1.5.8.45.107.70.1 This trap is sent when the MSTP
1.3.6.1.2.1.17.0.2
1.3.6.1.4.1.890.1.5.8.45.36.2.2
1.3.6.1.4.1.890.1.5.8.45.107.70.2 This trap is sent when the MSTP
1.3.6.1.4.1.890.1.5.8.45.27.2.1
1.3.6.1.4.1.890.1.5.8.45.27.2.2
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
DESCRIPTION
This trap is sent when the STP
root switch changes.
This trap is sent when the MRSTP
root switch changes.
root switch changes.
This trap is sent when the STP
topology changes.
This trap is sent when the MRSTP
topology changes.
root switch changes.
This trap is sent when more than
99% of the MAC table is used.
This trap is sent when less than
95% of the MAC table is used.
This trap is sent when a variable
goes over the RMON "rising"
threshold.
This trap is sent when the variable
falls below the RMON "falling"
threshold.
MES-3728 User's Guide