ZyXEL Communications ES3500-24 User Manual page 81

The following table describes the labels in this screen.
Table 9 Basic Setting > System Info
LABEL
System Name
Product Model
ZyNOS F/W
Version
Ethernet
Address
Hardware Monitor
Temperature
Unit
Temperature
Current
MAX
MIN
Threshold
Status
Voltage(V)
Current
MAX
MIN
Threshold
Status
ES3500-24 User's Guide
DESCRIPTION
This field displays the descriptive name of the Switch for identification purposes.
This field displays the model number of the Switch.
This field displays the version number of the Switch 's current firmware including
the date created.
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
The Switch has temperature sensors that are capable of detecting and reporting if
the temperature rises above the threshold. You may choose the temperature unit
(Centigrade or Fahrenheit) in this field.
BOARD, MAC and PHY refer to the location of the temperature sensors on the
Switch printed circuit board.
This shows the current temperature at this sensor.
This field displays the maximum temperature measured at this sensor.
This field displays the minimum temperature measured at this sensor.
This field displays the upper temperature limit at this sensor.
This field displays Normal for temperatures below the threshold and Error for
those above.
The power supply for each voltage has a sensor that is capable of detecting and
reporting if the voltage falls out of the tolerance range.
This is the current voltage reading.
This field displays the maximum voltage measured at this point.
This field displays the minimum voltage measured at this point.
This field displays the percentage tolerance of the voltage with which the Switch still
works.
Normal indicates that the voltage is within an acceptable operating range at this
point; otherwise Error is displayed.
Chapter 8 Basic Setting
81